The importance of car maintenance

On purchasing a car, one typically receives a booklet that contains the maintenance schedules that should be followed. With the modern technological advancements, car engines have significantly advanced. However, there still details that should be monitored regularly. One of the best ways to ensure that your car is prevented from breakdowns is by maintaining it regularly. From fluid level checks, brake inspections, tire inflation check, oil changes, inspection of lights, and belt checks, all are essential. It is recommended that maintenance be done after every 3,000 miles that the car covers. Not all these checks will be done at a go, and most maintenance will only involve oil change. At other times more intricate checks will be done, including sensors, belts, and gauges checks, which might require replacements, and this is where car part replacement companies such as TruckProUSA can prove helpful. This article covers the importance of carrying out car maintenance.

Monitoring the Car fluid levels.

ehicles depend on various fluids to ensure they are correctly running. While it is essential to visit a mechanic while carrying out routine maintenance, it’s wise to ensure that you carry out checks in between car inspections. Some of the fluids that are important to keep an eye on include;

Transmission fluid: Just like the case with engine oil, transmission fluid helps ensure that parts are well lubricated and functioning properly. If the transmission fluid runs low, it can lead to contaminants forming in a car’s moving parts, shortening its transmission life.

Oil: Usually, car engines require oil to lubricate the metallic parts. If the engine was to run out of oil entirely, the friction that the rubbing of metal causes would produce unwanted heat making the metals weld together. On the other hand, if the oil gets dirty, it becomes thick and erosive, causing erosion of the engine’s metal parts.

Coolant: Composed of propylene, or ethylene and water, coolant aids in the absorption of heat and then pass it to the radiator. The hot environment they are in causes the coolant to breakdown with time; if this happens, the lack of a coolant’s rust inhibitors could result in rust form leading to the blocking of the path they follow, which could potentially overheat your engine.

Steering fluid: It is the steering fluid that helps make steering a car easy. Failing to change this fluid could make it hard to turn the steering wheel.

Brake Fluid: While the brake fluid has characteristics that prevent it from getting dirty or evaporating, it can potentially absorb atmospheric moisture. When this happens, the lower boiling point of water can form air bubbles in the brake.

Routine brake checks

Depending on the roads you drive on regularly, driving in areas with many stop lights could mean that you often step on the brakes than on normal highways. A vehicle’s brake system usually is hydraulic, runs on brake fluid, and is made up of pads, which squeeze together when prompted. If the pads were to wear too thin, making the car stop or slow down could be challenging. Typically cars are equipped with service lights that turn on when it’s time to replace the brakes pads. For safety purposes, it is essential that you don’t only rely on this technology alone, but perform routine checks, see if there are any leaking fluid, check the thickness and thinness of the pads, hear if there’s any grinding sound and if you notice any signal that requires replacement then do so.

Tire pressure and alignments

Tires are an essential aspect of a vehicle, especially when arriving at the destination is concerned. Either too low or too high tire pressure can harm your car’s stability and braking. When the pressure is too high, less of the tire touches the ground, which negatively affects your car’s stopping distance and traction. On the other hand, low tire pressure results in much of the tire touching the road, resulting in more wear and tear due to the overheating caused by increased ground friction. The car owner’s manual has the recommended pressure that the car should have.

The alignment of your vehicle’s tire is another essential element to ensure that the vehicle’s suspension is optimally performing. If the tires aren’t correctly aligned, vibrations can cause the car veering to one direction, potentially causing accidents. If the vehicle has uneven tread wear, always take it to a service technician to align.

In conclusion, while maintaining a car is without doubt important, getting quality service parts may prove hard, however with review sites such as, one can always check for reputable companies offering the parts.